Using The Action Replay GCN on the Wii Without a disk or AR Card!!!!

[Hells Guardian]

Someone has managed to get this all working. this is an app that will launch The GCN AR dol and then force load the Gamecube game with the codes in place. It will give you complete access to the uses and functions of the Gamecube Action replay.

Things you will need.

1. The Homebrew Channel installed on your wii.
2. An SD card for use with the wii homebrew channel.
3. At least one 3rd Party Gamecube Memory card. Two is best.
4. A way to copy the action replay save data to you Gamecube memory card in slot B (a homebrew app for the wii to do this is included however it wouldn't work for me.......) You may be able to just use the actual Action Replay card instead. I couldn't try that.... I don't have one.
5. A Gamecube controller. (Duh)
6. A gamecube Game.
7. The download linked to at this location.
http://www.megaupload.com/?d=XWRCAU7S

When you have all these things just do the following

First take the Rvl-mios-v5.wad.out.wad file and the ar114.dol and apps folder and place them in your front sd card root dir. If an apps directory already exists on your sd card then copy only the subfolders into the apps directory. Now from the Homebrew channel run the program Mios patch. This will patch your Mios to enable the loader and the homebrew loader for the gamecube as well. Just follow the onscreen instructions. (shouldn't cause any problems for any of your wii's GC Compatability)

Insert original Gamecube game then run the Action Replay Loader from the Homebrew Channel. It will load into Action Replay v1.14. You can now use cheats with your ORIGINAL Gamecube dvds. (Do not try to change which game you are using after you start the AR. I have yet to try it with a multi disk game so I can't say if it works or not.......)

I'll be uploading a Wad File at a later time that will install a channel directly to your system menu to load this.

This does work but often has compatability issues with certain memory Cards (official Nintendo brands do NOT work). If yours do not work I don't know what to tell ya........ Best of luck to everyone with this. I'm uploading a channel for it as I type. You will still have to have the other items on the SD card. this is just the loader that will launch the dol file for the AR.

Here is the Channel
http://www.megaupload.com/?d=C53IR24A

[Lady Sirloin]

This... is... AWESOME! Now I don't have to buy PBR or Metroid Prime 3! Thanks for this, HG, you've saved me $50

[Hells Guardian]

LOL yeah hope it works. best of luck to you. of course it does patch the mios which can be problematic but I've not seen any problem. It generally works with a standard issue Nintendo Brand GC memory card.

Btw I added a channel install file to the above post. you will have to use wad manager to install it.

[hawkeye2777]

Source?

[Hells Guardian]

I don't recall where I downloaded it however I got the chance to try it and it worked. I'm currently digging through my history to try and find it.

Edit. found the place I originally found it.

http://www.eurasia.nu/modules.php?na...getit&lid=5385

It's a tool from Buzbee.

[hawkeye2777]

Ah, ok. Nice find.

Oh, btw HG, Official mem cards don't work with GCMM in Wii mode. So yeah, you'll need a 3rd party mem card as well.

[Hells Guardian]

Ah. that explains the problems I had. I just used the tool made for the Gamecube to upload the file. It worked quite well. although It had issues after a few uses..... I then switched to a 3rd party mem card and had no trouble at all.........

[hawkeye2777]

GCMM works fine with Official cards in Gamecube mode, btw. Although, you'd probably need a SD Gecko or similar to use it.

So this boots straight into the AR without having to swap discs?

[Hells Guardian]

You insert the disk before loading the app and when it gget's to the disk swap poriton it force loads the disk that is in the drive. I'm guessing the reason for this is that otherwise one would have to have actually found a way to get around the disk binding.........

[Aaron]

I will get this.

I assure you I will somehow.

[PikachuMan]

O...M...G.

FINALLY! I can(if I can find a SSBM disc) FINALLY once again use the Debug Menu! YES!

And can finally start goofing off in TPGC again

THIS KICKS ASS. It's even BETTER that I have a 3rd Party Memory Card and I already have a BUNCH of codes on my memory card

Thank you, HG. THANK YOU.

[Hells Guardian]

Don't thank me thank Buzbee. He's the one that made it. I simply found it. :D

[hawkeye2777]

You insert the disk before loading the app and when it gget's to the disk swap poriton it force loads the disk that is in the drive. I'm guessing the reason for this is that otherwise one would have to have actually found a way to get around the disk binding.........

...can you clarify a bit? I'm still a bit in the dark. :/

EDIT: Forget it, I got it after rereading your first post. Anyway... this does use Gamecube Homebrew Launcher then?

[Hells Guardian]

A modified form of it yes......... essentially the same thing but it forces the loading of the AR .dol instead of the the start.dol It does also manage to force the loading of the disk..... although I don't know that the unit will work with multy disk games.......

[hawkeye2777]

Ah. Well, I suppose this will prove useful to those who can't use my method/don't have an old AR disc.

I might try this somtime, though...

[Golbez]

The Wii hangs when I try to apply the MIOS patch. I've tried with both the Homebrew Channel and the Twilight Hack.
I have 3.3.2

[hawkeye2777]

The Wii hangs when I try to apply the MIOS patch. I've tried with both the Homebrew Channel and the Twilight Hack.
I have 3.3.2

That's probably why.

[Golbez]

How do I fix it?

[spunit262]

I'm ganna see if I can use this to launch the GC version of GeckoOS.

[Radical Hacker]

that is nice find Hells G

[Golbez]

I still need help.

[luigiman1928]

Remember the GC SaveExtracter? Can someone Extract there AR Data so i can use it? I lost my Data....

[Hells Guardian]

I uploaded a save file for use with it. as it dosen't install the data automatically like when using the dol on the GC..........

@Golbez I linked to a downgrading technique in another thread....... look for the CIOSCORP thread stickied here it has all the info you need on downgrading to an earlier firmware. If your not to skilled with homebrew and hacking I highly advise avoiding anything other than the downgrading and Backup launcher tutorial linked to in there. the rest involes highly modifying the system to enable backups to load dirrectly from first boot and if something goes wrong the fix is not pretty. BTW does anyone have a complete system menu 3.4 update file lying around? I'd like to include that as the uninstaller so that nintendo doesn't decide to release a new update with no way to reinstall homebrew if something should go wrong..........

[Hells Guardian]

OK this method works great. the hard part is tranfering the save file if needed. The main drawback is that you can only have one memory card inserted when loading this or it will error out. You can insert another after the game loads but the Action replay.dol file likes to crash if you have both inserted. So my good people please enjoy this. and if anyone has a save file with tons of added codes please let me know. I would like as many as I can get.

Yeah every time I have a second memory card in the damn thing crashes............ If I load it with the memory card with the Action replay save data on it in slot b and nothing in slot a it works great.

[luigiman1928]

About to try it now, Thanks HG!

[luigiman1928]

wait is it sposed to go dirctly to the game? i think i missed a step. do i HAVE to use the wad manager you gave us?
and how do i put it in gc mode? Me is having trouble with the wad thingy.

[Golbez]

I am too, I even downgraded to 3.2

I can install the wad through WAD Manager (but not the included program, which still hangs), but that doesn't allow the loader to work.

[luigiman1928]

i get this when i use the one HG gave me

failed rev = 1

am i doing something wrong!?

[hawkeye2777]

Did you install that patched MIOS first?

[luigiman1928]

thats what it shows me when i try to patch it.

[stickman]

Ah. Well, I suppose this will prove useful to those who can't use my method/don't have an old AR disc.

I might try this somtime, though...

btw... I got that to work after uninstalling regionfree in starfall. I have a working downgraded wii with gamecube action replay support .

I am curious to see how spunit turns out with the gamecube gecko os...

[luigiman1928]

I REALLY NEED HELP ME AR DISK BROOOKKKKEE!!! CAN SOMEONE HELP ME DO THIS!?!?!?!?!??!?!?!??!!

[hawkeye2777]

HG, I think you missed a part or two in your guide.

To those having problems, download AnyTitleDeleter and WAD Manager 1.3. Also, put the MIOSv5 WAD HG provided on your SD card in a folder named 'wad'. Now, run ATD (AnyTitleDeleter), and delete your MIOS (found in system titles). Restart, boot up WAD Manager 1.3 and install the MIOSv5 WAD. Now, try to do the other steps (patch, etc.).

Simply put, if the patch won't work for you, you probably don't have MIOSv5. In that case, follow my instructions above.

[luigiman1928]

can you post it to megaupload or mediafire? the ATD and the patch?

[hawkeye2777]

can you post it to megaupload or mediafire? the ATD and the patch?

Find AnyTitleDeleter on WiiBrew. The patch should be in HG's dl.

[luigiman1928]

sorry about this but i only have acsess to those sites. sorry.

[Golbez]

Mios patch software still hangs at launch. My firmware is 3.2U. downgraded from 3.3U

[hawkeye2777]

Mios patch software still hangs at launch. My firmware is 3.2U. downgraded from 3.3U

HG, I think you missed a part or two in your guide.

To those having problems, download AnyTitleDeleter and WAD Manager 1.3. Also, put the MIOSv5 WAD HG provided on your SD card in a folder named 'wad'. Now, run ATD (AnyTitleDeleter), and delete your MIOS (found in system titles). Restart, boot up WAD Manager 1.3 and install the MIOSv5 WAD. Now, try to do the other steps (patch, etc.).

Simply put, if the patch won't work for you, you probably don't have MIOSv5. In that case, follow my instructions above.

Did you try this?

[Golbez]

If you mean Rvl-mios-v5.wad.out.wad., then yes.

[raztheraz]

simple answer, press a....


...on the gamecube controller!



i downloaded the patch (thx hawkeye)

I went on the AR aplication....

it said reading disc...

and as soon as it says starting AR (or what ever it says...),
two pink lines appear on the left and the wii is crashed,
any ideas?

(p.s. i have 3.3.2 also - wanted to play animal crossing )

EDIT: nvm i just forgot to put the gc memory card in the slot b...
too bad i dont have a third party gc mem card...
but...
CONFIRMED FOR WII v3.3.2!!!!

[Hells Guardian]

I asume you are using the MIOS Patch wad installer and not Wad manager to install it? Also not that the patcher requires you to use the GC controller. It will not work with the wii remote. as for installing files through wad manager you should be able to go ahead with out that..... It's just a channel that loads the launcher for you........... It will work loading the launcher file through the HBC. Be forwarned that a patch of MIOS can break gamecube support though. If disks are not working after the patch is installed You will have to reinstall an unpatched version of MIOS and try again. Best of luck to you folks.



@Raztheraz You also have to have the AR114.dol file on the root of the SD card. It must be named AR114.dol or the loader wont see it. Thats likely why you are having a problem. If you do have it in place and it still won't load the only other thing I can think of is that you aren't putting the disk in before loading the app.......

[Golbez]

Using the GCN controller did nothing, MIOS Patch is frozen, the Wii has to be unplugged. Does it not work on a US Wii?

[Hells Guardian]

I'm using a US Wii. although my wii has been heavily modified...... I've patched the system menu and everything else I could possibly do..... I have modified it to a point I could not tell you what normal function of the system is............. It's amazing what a few software hacks will do........


maybe try the homebrew launcher? hold on I'll get you the files.


Here is a link

http://perso.latribu.com/decker/wii/download/WiiHL-012.zip

[Golbez]

Still froze.

[raztheraz]

@Raztheraz You also have to have the AR114.dol file on the root of the SD card. It must be named AR114.dol or the loader wont see it. Thats likely why you are having a problem. If you do have it in place and it still won't load the only other thing I can think of is that you aren't putting the disk in before loading the app.......

did you read my above post?

its working fine now...

btw why doesn't it work with 1st party gamecube memory cards?

@golbez
have you done anything with your wii?
its seems to me that we have the same basic wii setup (yes mine is US too)
are you using wad manager?
did you delete your MIOS with anytitle deleter before downloading the wad?
did you yell at your wii for not working? XD
if yes... my only idea is for you to download the app again, because when i had problems i just got an error code...

[Hells Guardian]

Oh thats good. I actually got it to work quite reliablely with my memory card. I intentionally corrupted it and reformatted it and it works great now...... I think it was just all the stuff on it already. lol

[Golbez]

did you read my above post?

its working fine now...

btw why doesn't it work with 1st party gamecube memory cards?

@golbez
have you done anything with your wii?
its seems to me that we have the same basic wii setup (yes mine is US too)
are you using wad manager?
did you delete your MIOS with anytitle deleter before downloading the wad?
did you yell at your wii for not working? XD
if yes... my only idea is for you to download the app again, because when i had problems i just got an error code...

Tried all that, still froze. The only homebrew installed is the Homebrew Channel. I am not using WAD manager.

[Radical Hacker]

might give it a try later, When i have the time this weekend..."IF" i have the time

[spunit262]

btw... I got that to work after uninstalling regionfree in starfall. I have a working downgraded wii with gamecube action replay support .

I am curious to see how spunit turns out with the gamecube gecko os...

It loaded but the disk didn't work.

As for the save, Use Gecko Card and GeckoOS to upload it.

Edit: It only seams to work a third of the time, it ether crashes or the memory cards don't work.

[stickman]

that's strange... at least it works some of the time. I found that when I first used hawk's guide to downgrading mios to use the action replay, i had to try three times for it to work, and ever since then, it has worked perfectly

[luigiman1928]

Ok serolsey patch. please. try. no mess up!

dead.

[hawkeye2777]

btw why doesn't it work with 1st party gamecube memory cards?

Bug with libogc. 1st party cards work fine in GC mode, btw.

Tried all that, still froze. The only homebrew installed is the Homebrew Channel. I am not using WAD manager.

There's your problem.

[luigiman1928]

mine goes STRAGHT to the game. tryed the wad thing he gave me and

fail rev = 1

help me.

[raztheraz]

mine goes STRAGHT to the game. tryed the wad thing he gave me and

fail rev = 1

help me.

did you use atd to delete the current MIOS?

@hawkeye... is there a way i can format my 1st party gc card for it to work?
also isnt it already in gc mode when u use it?

[raztheraz]

Tried all that, still froze. The only homebrew installed is the Homebrew Channel. I am not using WAD manager.

here is exactly how i did it...

1.download the apps and put ar114.dol and RVL-mios-v5.wad.out.wad in the root directory (don't put it in apps)
2. put a second RVL-mios-v5.wad.out.wad in a folder named "wad"
3. Using any title deleter, delete the current MIOS of your system - look on wiibrew for the the number...
4. go to WAD manager and download RVL-mios-v5.wad.out.wad
5. Use the mios patcher, it should work now. (Golbez, i recommend that you download a fresh copy of this if it doesn't work now)
6. Go on the AR application -make sure you have your memory card in slot-b and your gc disc already inside.
7. walla

@anyone could somebody make a channel for this?

[hawkeye2777]

I meant the Gamecube version of GCMM. And no, currently there is not a way to do that.

HG posted a channel in the first post, btw.

[Golbez]

here is exactly how i did it...

1.download the apps and put ar114.dol and RVL-mios-v5.wad.out.wad in the root directory (don't put it in apps)
2. put a second RVL-mios-v5.wad.out.wad in a folder named "wad"
3. Using any title deleter, delete the current MIOS of your system - look on wiibrew for the the number...
4. go to WAD manager and download RVL-mios-v5.wad.out.wad
5. Use the mios patcher, it should work now. (Golbez, i recommend that you download a fresh copy of this if it doesn't work now)
6. Go on the AR application -make sure you have your memory card in slot-b and your gc disc already inside.
7. walla

@anyone could somebody make a channel for this?

Still seemed to freeze. Does it require a Classic Controller? Also, what WADs, Channels, and IOSs do you have installed? BTW, I did download a fresh copy.

[luigiman1928]

Wait, i have to have My MemoryCard in slot B? Then thats why...

[raztheraz]

Still seemed to freeze. Does it require a Classic Controller? Also, what WADs, Channels, and IOSs do you have installed? BTW, I did download a fresh copy.

it doesnt require a clasic controller (i dont even own one XD)
i cant tell you right now, can't access the wii

ill get back to you on that

[Golbez]

Still need help.

[raztheraz]

tell me what IOSs you have so i can compare and get back to you

[hawkeye2777]

Still need help.

1. Did you downgrade your MIOS? This will only work with MIOSv5.
2. Do you have all of your files in the correct spots?
3. Say what IOS's you have (for raz).

[luigiman1928]

Ok, i got the atd now when i use it to rid my wii of the mios, it wont do ANYTHING!!!! I, HATE, MY, WII!!!!

[hawkeye2777]

Ok, i got the atd now when i use it to rid my wii of the mios, it wont do ANYTHING!!!! I, HATE, MY, WII!!!!

What firmware do you have?

[luigiman1928]

Idk. Where do check it at? The Wii System setings?
EDIT: If your talking about my IOS, its 12.18

[hawkeye2777]

Idk. Where do check it at? The Wii System setings?

yes...

[luigiman1928]

System, 3.3U, IOS, 12.18

[Golbez]

1. Did you downgrade your MIOS? This will only work with MIOSv5.
2. Do you have all of your files in the correct spots?
3. Say what IOS's you have (for raz).

I have MIOSv5, and I do have all files in the correct spots.


IOS249 0.4
MIOS 0.5
IOS16 1.1
IOS51 18.25
IOS10 3.0
IOS37 8.22
IOS36 4.18
IOS14 1.6
IOS34 4.15
IOS33 4.16
IOS35 4.16
IOS28 5.12
IOS22 3.9
IOS31 4.16
IOS30 4.15
IOS21 2.2
IOS20 0.12
IOS17 2.0
IOS15 1.1
IOS13 0.10
IOS12 0.6
IOS11 0.10
IOS9 2.8
IOS4 255.0

[Hells Guardian]

So it just completely freezes right away when you try to load the MIOS patcher? Hold on I'll see if I can find a patched version to install...... I'm no good with recompiling a system menu dump so that's out of the question. I'd rather not be the source of your wii being bricked......... Google here I come.

[Golbez]

Updated my last post with IOS list.

It freezes as soon as I start the patcher, and the text is shown.

[raztheraz]

Updated my last post with IOS list.

It freezes as soon as I start the patcher, and the text is shown.

I have no idea why it wont work...

it works perfectly for me (WOOHOO!)

not to get off topic, does anybody have an ar save file with a lot of codes?
I'm specifically looking for melee

[hawkeye2777]

Updated my last post with IOS list.

It freezes as soon as I start the patcher, and the text is shown.

Hmm... have any Gamecube mem cards inserted?

[PikachuMan]

I have no idea why it wont work...

it works perfectly for me (WOOHOO!)

not to get off topic, does anybody have an ar save file with a lot of codes?
I'm specifically looking for melee

I have one, but I don't have it uploaded anywhere.

I'll try to remember to upload it tomorrow. My list has almost 100 codes, BTW.

Took FOREVER to get that Stamina Mod for the Debug Menu entered >_<

[raztheraz]

I have one, but I don't have it uploaded anywhere.

I'll try to remember to upload it tomorrow. My list has almost 100 codes, BTW.

Took FOREVER to get that Stamina Mod for the Debug Menu entered >_<

thx man!

...wait what version is it?

(i have 1.2...)

[Hells Guardian]

You guys asked for a channel for this? did you not? well in the very first post since about 10 minutes after I first posted this topic there was a link for a channel download added. If it bricks a wii then god damn I'm lucky cuz I have installed it on mine and it works like a charm either way you still HAVE TO HAVE the AR114.dol in the root of the sd card.


"Here is the Channel
http://www.megaupload.com/?d=C53IR24A :"

[raztheraz]

You guys asked for a channel for this? did you not? well in the very first post since about 10 minutes after I first posted this topic there was a link for a channel download added. If it bricks a wii then god damn I'm lucky cuz I have installed it on mine and it works like a charm either way you still HAVE TO HAVE the AR114.dol in the root of the sd card.


"Here is the Channel
http://www.megaupload.com/?d=C53IR24A :"

did you make the channel?

[Hells Guardian]

Indeed. The images are a bit off but thats because I through it togeather quickly without resizing them. It works great though.

[Hells Guardian]

Golbez 1st what system menu are you using? if you are on System menu 3.3 and above I believe that wad installing was blocked and it requires a special fix to enable you to install them. Follow the first portion of the downgrade tutorial to find out how to do that.

To apply the fix do the following.

Load Wad Manager 1.3 in Homebrew Channel and install IOS16-64-v257-prod.wad
It should work without any problems.

Load WAD_Manager_IOS16 in Homebrew Channel and install cios_fix.wad
You cannot install this wad with Wad Manager 1.3. WAD_Manager_IOS16 is a custom version designed to work on a different IOS For this exact purpose.

Load IOS Downgrader 1.0 in Homebrew Channel. Just follow any prompts until it tells you it is complete.

Please don't use this fix to pirate VC Games.

If thats the problem then congrats problem solved.

Here is a link to the needed files for this task.

http://www.megaupload.com/?d=9HAJGGGH

That should solve the problem. If it doesn't then Call nintendo and bitch that the units deffective. lol

BTW you will still have to apply the MIOS Patch after this is done. Hope everything works alright for you.

[raztheraz]

2 questions:

1. hells guardian: did you use WADder to make the channel?

2. After downloading the AR, i tried playing animal crossing, and it said i needed an update even though i already did before. Does this mean my system menu was downgraded from 3.3.2 to 3.3.1? or is it just specific parts of it?

[Hells Guardian]

1st Yes I did.

2nd don't do the update it means that the MIOS version on the update partition of the Game is higher than the version of the patched mios. There may be ways you can patch the system so that it skips the update check......... I'll look around for you...... In fact I'm planning on doing a lot of work with my wii today as is so I'll try system menu 3.3 and see what I can find as far as a patch goes..... I think wanikoko released a tool that can do it but I have yet to try....... You will have to load through gecko OS for now or just repatch your mios everytime you go to use the AR Loader.

[hawkeye2777]

2 questions:

1. hells guardian: did you use WADder to make the channel?

2. After downloading the AR, i tried playing animal crossing, and it said i needed an update even though i already did before. Does this mean my system menu was downgraded from 3.3.2 to 3.3.1? or is it just specific parts of it?

2. That's because the version of MIOS on the disc is different than what is on your system; just boot it w/ Gecko OS, or downgrade and install Starfall (last 3 patches on the selection screen).

[raztheraz]

I'm fine with gecko os (i heard starfall is risky)

@hells guardian: do you mind if i make a bit of a nicer looking channel?

Probably wouldn't be today since its my birthday whoo!!!!

[Hells Guardian]

no by all means go ahead. and happy birthday. btw assuming you are on 3.2 starfall isn't any worse than installing a custom made channel

[raztheraz]

no by all means go ahead. and happy birthday. btw assuming you are on 3.2 starfall isn't any worse than installing a custom made channel

but is downgrading dangerous?

[Hells Guardian]

It's not all that dangerous as long as you know what your doing. I've not heard of anyone that has actually managed to brick their wii with the proccess. If your not that bothered by the minor inconviniece I would just go with Gecko OS. Otherwise if you are like me and extremely annoyed by such trivial things than downgrading is advaside. lol

[raztheraz]

It's not all that dangerous as long as you know what your doing. I've not heard of anyone that has actually managed to brick their wii with the proccess. If your not that bothered by the minor inconviniece I would just go with Gecko OS. Otherwise if you are like me and extremely annoyed by such trivial things than downgrading is advaside. lol

not to get even more off topic, but what exaclty does starfall do?

[Hells Guardian]

It patches the system menu for such things as removing the disk update checks and enable access to the recovery menu ect ect.....

[raztheraz]

recovery menu... does that mean protection from bricks/semi-bricks?

[luigiman1928]

Please can you help me get the AR Loader working..... MyARdiskRECENTLYBROKE..... Canu help mewith the dongrader... like giving me a wad of the downgrad....

[raztheraz]

Please can you help me get the AR Loader working..... MyARdiskRECENTLYBROKE..... Canu help mewith the dongrader... like giving me a wad of the downgrad....

wait.. what version do you have?

it worked for me on 3.3.2

[luigiman1928]

....mines...3.3.X all i kknow is that its 3.3U
Informing Wii that I am God... ERROR!

[PikachuMan]

I still need to get this installed

for anyone with it installed; how easy is it? I'm too lazy to attempt it on the weekend as I have better things to do... like play GH

[hawkeye2777]

recovery menu... does that mean protection from bricks/semi-bricks?

Pretty much, yeah. With Starfall installed, you can press Y on the first GC controller inserted to get into the recovery menu (which auto-boots the disc in the Wii). You could put a copy of the Twilight Hack save on your Wii, that way you can just run that if something bad happens to your Wii.

[raztheraz]

but what if i have a tp savefile?

[Hells Guardian]

yeah pretty much.

@luigiman you should be able to do this just fine with the things supplied in the pack in the first post. if you have errors trying to install wads than use the fix I mentioned and it should work. other than that you should be good to go if you get the AR Save file to the memory card.

@Pikachuman (Damn yellow rat in SSBB I hate it!!!!!) anyways as I was saying It's very simple and straight forward. if done correctly it should take no more than 15 minutes between the wad installs and the transfer of the game save for the AR.

[luigiman1928]

[QUOTE=Hells Guardian;135287]

@luigiman you should be able to do this just fine with the things supplied in the pack in the first post. if you have errors trying to install wads than use the fix I mentioned and it should work. other than that you should be good to go if you get the AR Save file to the memory card.
[QUOTE]
Me got no internet but me will try get some.

[hawkeye2777]

Maybe I could install the patch myself, then upload the patched MIOS for you, luigi.

@raz: You'd have to replace it.

[luigiman1928]

Mr.L fan would like that.

[hawkeye2777]

Actually luigi, I don't think this uses an internet connection. It is based on the PatchMii core, but it doesn't download the MIOS from Nintendo's servers.

[luigiman1928]

Actually luigi, I don't think this uses an internet connection. It is based on the PatchMii core, but it doesn't download the MIOS from Nintendo's servers.

actually... it does! tried it and poop.